9.8.11

Cheap Kicker CompVX 06CVX124 12-Inch 4-Ohm DVC Subwoofer for $174.99 Kicker

Kicker CompVX 06CVX124 12-Inch 4-Ohm DVC Subwoofer Review





CHECK PRICE TODAY!






Technical Details

  • 12-inch CompVX subwoofer with 4-ohm impedance
  • The power and performance of a Kicker square woofer in the round
  • 750 Watts RMS (1500 Watts peak) power handling
  • 20-500 Hz frequency response
  • One-year limited warranty





Kicker CompVX 06CVX124 12-Inch 4-Ohm DVC Subwoofer Overview


The facts are there--square woofers have more cone area, move more air, and therefore are louder than round woofers of the same size. But face it; some custom installs don't lend themselves to the four-sided superiority. Now, KICKER has allocated all the power and performance of its patented square-woofer technology in the round! Presenting the CompVX Subwoofer, the most intense round woofer on the planet and ready to plug into any high-end install.

The power and performance of Kicker's patented square woofers in the round. Click to enlarge.

Heavy-duty L7 motor assembly. Click to enlarge.

Ribbed Santoprene surround. Click to enlarge.

It's the most technologically advanced subwoofer available, with exclusive KICKER design and performance features in a round woofer. Available in the 10-inch CVX10, the 12-inch CVX12, and the 15-inch CVX15, the CompVX Series continues the remarkable legacy of outstanding bass from the KICKER labs.

CompVX utilizes the complete KICKER recipe for bass. Vacuum-molded SoloKon, poly-cotton semi-progressive spider, dual high-temp voice coils, jacketed braided tinsel leads, highly-efficient UniPlate pole piece/back plate, and the heat-reducing T-cut top plate--it all comes together to form a super-reliable motor structure found only in a KICKER subwoofer.

The basket is cast aluminum with spring-loaded terminals that can accept up to 10-gauge wire. A protective front gasket further strengthens the ribbed Santoprene surround, and the rear foam gasket makes for an airtight seal in the installation.

The CompVX Series is available in 2-Ohm or 4-Ohm DVC and thoroughly pounds in a sealed or vented box application.

CVX12 Features

  • Heavy-duty L7 motor assembly
  • Lighter, round SoloKon
  • Cast aluminum basket
  • T cut top plate
  • Flared aluminum coil former

What's in the Box
CVX12 subwoofer (4-ohm impedance), Installation hardware, User's manual

7.8.11

Best JBL W12GTi MkII 12" Dual 6 ohm GTi Series Subwoofer with Differential Drive Design (DDD) Motor (W12GTiMkII)

JBL W12GTi MkII 12" Dual 6 ohm GTi Series Subwoofer with Differential Drive Design (DDD) Motor (W12GTiMkII) Review





CHECK PRICE TODAY!






Technical Details

  • 12" Dual 6 Ohm GTI Competition Level Subwoofer
  • Peak: 4000 watts | RMS: 700 watts
  • Impedance: Dual 6 ohm
  • Frequency response: 18-1000 Hz
  • Sensitivity: 91 dB





JBL W12GTi MkII 12" Dual 6 ohm GTi Series Subwoofer with Differential Drive Design (DDD) Motor (W12GTiMkII) Overview


Enjoy your favorite tunes on the go with this 12" subwoofer that features a KEVLAR -impregnated paper cone with a ported, die-cast basket and high-roll nitrile butylene surround for amazing bass response.

6.8.11

Redesigning My Homemade Subwoofer

This is showing the process of me redesigning this sub. I had to do this because fits in the enclosure way better, the old one didn't fit because the cutout diameter was 1/4" too wide and the tape holding the rubber bands that I used for a spider came loose and the surround had air leaks in it. This one is better designed. The surround is taller so it can handle more excursion. If someone wants make one, these are the materials I used but you can try different materials if you want. Cone and basket - foam board(very stiff and very light) surround - duct tape spider - file folder voice coil bobbin - paper towel roll voice coil wire - 26AWG enamel coated wire(from Radio Shack) glue - hot glue and gorilla glue